I'll be happy to help you with your questions but first, the part # RVS-910 you asked about will only fit a 2003-2016 Chevy Express. Since you have a 2019 you need the part # RVS-913 instead. This does come with 10 meters of cable and while we don't have any photos or videos of this installed, I am attaching a clip from the spec sheet that gives a simple break down of how the connections are made. Essentially you will replace your 3rd brake light with this unit and then route the wiring... view full answer...
100% we can hook you up with the parts needed to add a hitch, wiring, and brake controller to your 2012 Chevy Express passenger van. For cargo mats we don't have anything able to cover the entire floor area, the best we can do is offer floor mats like the WeatherTech All-Weather Rear Floor Mats # WTW25GR.
I know those mats aren't what you wanted specifically but I thought it wouldn't hurt to at least give you the option if you wanted. As for the hitch, wiring and brake controller? That... view full answer...
Yes, the Yakima SweetRoll # Y04074 will fit the Rhino-Rack Vortex Aero-Style bars.
If you don't already have the Vortex crossbar system on your 2015 Chevy Express Van then you'll need the following parts:
65" Vortex Crossbars - # RRVA165B-2
Gutter Mount Legs - # RRRL150GMC-2
Roof Rack Adapters - # RRVA-FK1-2 view full answer...
You are correct the Progressive Dynamics Mighty Mini AC/DC Panel and Converter/Smart Charger # PD4060K does not have a negative DC grounding bus. This is typical of RV panels like this. view full answer...
With your 2022 Chevrolet Express 3500 being a cutaway you will need the Buyers Products 2" Hitch Receiver # 3371801102. If you are going to be towing with this receiver you will also need the electrical. The Universal Wiring Harness # 22551 will provide you with all the wiring needed to install a 7-way. It also includes the connector for installing a Tekonsha Brake Controller # 90195. As this type of controller is rather large and takes up leg room on the dash you should consider the Redarc... view full answer...
Both the # RM-1109-175-00 and the # RM-1109-150-00 sway bars are a confirmed fit for your 2004 Chevy Express 3500 Class C Motorhome. The # RM-1109-150-00 is 1-3/8 inch in diameter with a more shallow bump to fit around the rear differential and and the # RM-1109-175-00 is 1-1/2 inch in diameter with a larger bump to clear the rear differential. Because of the thickness and clearance space the # RM-1109-175-00 is the better option for your motorhome. view full answer...
The Curt Trailer Hitch Receiver - Custom Fit - Class V XD - 2" # C15320 is a confirmed fit for your vehicle and the bottom of the 2" receiver would be 4" from the bottom of your frame so this hitch has the best ground clearance for you. The Buyers Products 2" Hitch Receiver For GM Express/Savana with Cutaway Chassis Item # 3371801102 is not a confirmed fit for your vehicle and has the 7" drop that you were not wanting.
The C15320 hitch has a 16,000lbs maximum tow weight capacity but you'll... view full answer...
Unfortunately there is not a set of Aries ActionTrac nerf bars that fit your 2012 Chevrolet Express van with 135" wheel base. Nor do we have a set of motorized nerf bars that are similar.
For a set of nerf bars that do fit your 2012 Chevrolet Express van with 135" wheel base, we have the DeeZee Rough Step Running Boards # DZ15300A-15316. view full answer...
I may have an option for you, but there is not a custom fit front mount trailer hitch receiver confirmed to fit your RV on a 2017 Chevrolet 4500 cutaway chassis.
We have had customers use a universal hitch like the Draw-Tite Ultra Frame Service Body Trailer Hitch Receiver # 41990-07 to add a front mount hitch to their vehicle. This will likely require trimming of the bumper fascia and a fitting the brackets to fit the frame of your Chevy 4500 Cutaway. I recommend having a qualified welder... view full answer...
Thank you for all of the information and pictures! It looks like you should at least have some wiring already run on your 2019 Chevy Express Van 3500 so I'm just as confused as to why you don't have a round plug with a cap inside the driver's side frame rail or blunt cut wiring in the jack storage compartment. Aside from double checking and having someone else check as well (to get a pair of fresh eyes on your vehicle), the only other thing I can really offer is to just run your own wiring... view full answer...
Yes, there is a velcro strap that holds the Adco Deluxe RV Windshield Cover for Class C Motorhome # 290-2509 to the mirrors of the RV like your 2019 Forest River Forester 2252LE. I attached a picture that show how the strap works. view full answer...
The Surco Safari Rack 5.0 Cargo Basket # SPS5084-T400 that you referenced is designed specifically to mount to Thule square crossbars. Thule square bars measure 1-1/4 inches wide and 7/8 of an inch tall. If these specs match the dimensions on your ladder rack bars then the basket will work great.
If not you will want to go with a more universal basket like the Yakima OffGrid # Y07139-09 that features similar overall dimensions of 75 inches long and 49 inches wide but includes mounting... view full answer...
The Dexter Nev-R-Adjust Electric Trailer Brake Assembly # 23-468 will work with many standard hub and drum assemblies, including from Lippert.
This assembly is for 3,500 lb axles with a four bolt mounting flange pattern and wheel sizes between 13 and 15 inches. view full answer...
For the 2003 Chevrolet Express Van 3500 there are two options for a VanTred Custom Floor Mat. Part # VTRG96X, is for the Extended version or MaxiVan and part # VTRG96 is for the standard length van. This floor liner provides a non-skid, heavy-duty rubber work surface in your van.
There is also the option of the VanRug Custom Floor Mat for your vehicle. If you have the Extended, MaxiVan, version you would use part # VRG96X, and if you have the standard length van you will need part # VRG96.... view full answer...
Yes the Equal-i-zer weight distribution shanks are compatible with the Fastway e2 weight distribution heads. Thankfully nearly all weight distribution system manufacturers make their heads to fit the same shank dimensions.
I'd say the tongue weight of your trailer when loaded would work great with the Fastway e2 kit part # FA94-00-1000 that you have as this has a TW range of 600-1,000 lbs. When your trailer is loaded it's tongue weight is most likely going to be over 600 lbs which would... view full answer...
I contacted the tech at Curt and the wiring harness part # C55335 is internally grounded inside the wiring harness. There is not a need to ground the white wire separately because it is built into the wiring harness. The instructions Curt sent were universal instructions. You can just plug into the vehicle's wiring behind the driver's side and passenger's-side rear interior trim panels and it works. view full answer...
Yes, certainly we can and will make the requested measurements but first let me be certain I am understanding correctly what you need. What I think you are wanting is a hitch for your 2005 Jayco Greyhawk that is built on the Ford E-450 Chassis. The Curt Trailer Hitch Receivers, # 13040 and # 14090 are designed to fit the Chevrolet Express Van. The bolt pattern and dimensions are not going to match the E-450 frame.
There is not a bolt on hitch option for your 2005 E450 Chassis, the... view full answer...
No custom-fit towing mirrors are made for your van and CIPA's Custom Towing Mirrors # CM11550 are made specifically to fit late model Ford F-150 pickups, so they will not work on the mirrors on your 1997 Chevrolet 1500 Express Van. But we do have a solution for you.
A popular option is the K-Source Clip-On Towing Mirror # KS3891 which fits both driver and passenger mirrors. Note it is sold individually so order two to have one on both mirrors.
For a really great view of the trailer and... view full answer...
I reached out to my contact that does the fit over at Rhino Rack and he said that the Rhino-Rack Roof Rack Legs - Gutter Mount - 5-9/10" Tall - Qty 6 # RRRL150GMC-3 you mentioned for your 2013 Chevy Express Van do not need any additional shims or components to fit your vehicle gutters. He said they are aware of the caulk and that other companies may require different fits due to the caulk, but it is not an issue for the way these legs clamp onto the gutters.
These legs have custom-fit... view full answer...
If the plug was located along the drivers side frame rail on your 2018 Chevy Express Van, maybe taped up or rolled up inside the frame rail with 7 pins. It could have a cap on it to protect the pins, it is most likely the tow package wiring. I would test the plug first. If they test out then all you would need is the 7- and 4-Pole Trailer Connector Socket w/ Mounting Bracket - Vehicle End Item # HM40975 and a Curt No-Drill Bracket for 6-Way or 7-Way Round Trailer Connector Mounting Bracket... view full answer...
Go To Results